CellPhone Signal Boosters: A Step-By-Step Installation Guide

Srikanth
4 Min Read
CellPhone Signal Boosters: A Step-By-Step Installation Guide 1

You may have just bought a new home in the quietest neighborhood… but did you check to see if you get good cellphone reception? This is often something that is neglected or overlooked, leaving you with a cellphone you can rarely use in the comfort of your own home. Worry no longer, as the benefits of a cellphone signal booster can help you to take care of that problem.

How Cellphone Signal Boosters Work

When buying a Cell phone signal booster for home, you want to look for one that works with your phone. They amplify your 5G and 4G signals so that you have better phone reception and won’t have as many dropped calls. However, you can only reap these benefits if it’s been installed correctly in your home.

1. Find the Best Cellular Signal Outside your Home

Cellphone signal boosters are also called repeaters or extenders, so that’s something else to look for when shopping. They use an antenna that has to be placed outside in order to attract the strongest signal. You should test the outside signal first by using your phone’s signal bars or using dBm measurements through your phone’s settings.

2. Install the Outside Antenna

Once you’ve figured out where the strongest cellphone signal is, you should install your antenna, most likely on the roof of your house. Preferably, it should be at the highest point possible so that the antenna has an improved line of sight with the nearest cellphone tower. Depending on the kind of antenna you have, you might have to point it directly at a tower.

3. Connect the Outdoor Antenna to the Amplifier

Once the antenna has been installed, the next step is to connect the coaxial cable and run it inside your home. This might entail drilling a hole into your home or running the cable through a vent that already exists. Once you’ve found the right method to get the cable inside your home, it’s a good idea to have a drip loop added so that water drips off the cable before entering your home.

4. Install the Inside Antenna

The inside antenna should be installed in an area where you are having connectivity issues. The cellphone booster kit you buy might come with a certain type of indoor antenna:

  • Dome Antenna: requires to be ceiling-mounted so that the signal can be provided 360 degrees.
  • Panel Antenna: requires to be wall- or ceiling-mounted. Provides a signal of 45 to 70 degrees.
  • Desktop Antenna: placed on flat surfaces, so no mounting is necessary.

5. Turn On

Once everything has been installed, it’s time to power everything on. Just connect the power cord to the amplifier and give everything a few seconds to configure itself. The lights should turn green once everything has been established.

Never worry about dropped calls again with a cellphone booster in your home. What’s great about these booster kits is that if you need to make any adjustments, it’s pretty easy to do. And if there’s a momentary hiccup in its functions, just unplug it, wait a few seconds, and plug it back in to reset its signal-boosting powers.

Share This Article
Passionate Tech Blogger on Emerging Technologies, which brings revolutionary changes to the People life.., Interested to explore latest Gadgets, Saas Programs
Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *