How To Fix windows Has Detected An Ip Address Conflict Error

An IP address is a unique way to identify your computer when connected to a network. Each device has a different IP address, making it simple for the system to differentiate them. If you’re getting the “Windows has detected an IP address conflict” error, it means that your IP is already in use within the network. All private IP addresses must be unique, or else you will run into complications.

How To Resolve Windows Has Detected An Ip Address Conflict Error

For example, if you connect a PC, a laptop, and a smartphone to the same network, there should be three IP addresses. However, if two of these devices share the same IP address, it’ll be virtually impossible for the network to differentiate between them. This is either an issue in your PC settings or your router.

You should troubleshoot this issue immediately after receiving it. The conflicting IP addresses can lead to complications when using the network. Use this source by routerlogin to gain a proper one first. Follow our guide to learn how you can get rid of this error message.

Windows Has Detected An Ip Address Conflict Quick Fixes

There are many ways to solve your IP address issues. Some are more advanced than others; our list goes from the most straightforward solutions to more advanced ones. Because of this, it’s recommended to try the methods in order from top to bottom. If the more straightforward methods didn’t work for you, follow our steps to ensure that your devices are restored to have unique IP addresses.

Solution 1: Restart Your router

Your router is responsible for assigning IP addresses to each device connected to the network. It’s possible that your router failed to give a unique IP to a device, resulting in the “Windows has detected an IP address conflict” error message.

1. Locate the power button on your router and turn the device off. This will disconnect you from the internet and shut down the network temporarily.
2. Wait for a few minutes. Usually, 5 minutes is more than enough time for your router and network to shut down properly.
3. Turn your router back on.
4. When your router is done turning back, try and check if the error is still present. You might have to re-connect your devices to the network.

Solution 2: Disable Then Re-enable Your Network Adapter

The network adapter in your device interfaces it to the network. It can either be a USB network adapter or a wireless one. Disabling and re-enabling this adapter in Windows can often fix issues with your connection. Please note that you’re required to have a local user with administrative permissions to perform this method.

1. Press and hold the Windows key on your keyboard, then press R. This will bring up the Run utility.
2. Type in ncpa.cpl and click on the OK button. Doing this will open up the Network Connections window.
3. How to open a network connection window
4. Right-click on the adapter you’re using, then select the Disable option.
5. How to disable the network adapter
6. Once it’s appropriately disabled and you’re disconnected from the network, right-click on the same adapter and click Enable.
7. How to enable network adapter
8. Restart your device and try to check if the IP conflict is still happening.

Solution 3: Release And Renew Your IP Address

This method is one of the most reliable ways to solve network problems, especially with IPs. We will be using commands to release your current IP and prompt your router to assign a new, fresh IP to your device. Please note that you’re required to have a local user with administrative permissions to perform this method.

1. Search for Command Prompt in your search bar. Right-click on the top result and choose Run as administrator. You might be prompted to enter your user password.
2. Running command prompt through administrative privileges
3. In the command prompt window, type in the following three commands. Make sure you press enter after each one:

netsh int IP reset c:\resetlog.txt

ipconfig /release

ipconfig /renew

4. After attempting to do this, test if Windows still detects an IP address conflict with your device. Even if the error persists, we still have some methods that might help you with troubleshooting.

Solution 4: Remove Static IP

Having a static IP address means that the address your computer is using was entered and configured manually. This can cause issues on your network.

It’s often preferred to have an IP address automatically assigned to your device by your router. If you’re getting the “Windows has detected an IP address conflict” error message, we recommend using an automatic IP instead.

1. Press and hold the Windows key on your keyboard, then press R. This will bring up the Run utility.
2. Type in ncpa.cpl and click on the OK button. Doing this will open up the Network Connections window. Windows network adapter
3. Right-click on the adapter you’re using, then select the Properties option.
4. Network properties
5. Double click on Internet Protocol Version 4 (TCP/IPv4).
6. tcp/ipv4
7. From the General tab, select both Obtain an IP address automatically and Obtain DNS server address automatically.
8. Click the OK button on both windows and restart your computer.

Solution 5: Update your Network Card Driver

Regularly updating your drivers is something you should do all the time. Outdated network card drivers can cause more trouble than you’d think. There are multiple ways in which you can update your drivers. Follow one of the guides which suit your approach.

Method 1: Update your driver from Windows itself

This method will use the integrated Device Manager to find a new, updated driver.

1. Press and hold the Windows key, then press R. This will launch the Run application.
2. Type in devmgmt.msc and hit OK to open the Device Manager.
3. Device manager
4. Expand the Network adapters section by clicking on the arrow icon.
5. Right-click on your driver and select Update Driver.
6. Click on Search automatically for updated driver software.
7. How to Search automatically for updated driver software
8. If Windows can find an updated driver, it will automatically download and install the update to your computer.
9. Restart your PC and test if the issue is solved.

Method 2: Update your drivers with a third-party app

You can also find and download third-party updater tools such as Driver Booster, DriverHub, or DriverPack Solution. These three tools are all free and easy to use, but you can always look around the web for more advanced apps.

Note: Always make sure that the app you’re using is trustworthy. Many applications that promise to fix or update your drivers contain malware, adware, or spyware. We recommend searching the name of the product and reading reviews made by real people.

Solution 6: Disable IPV6

Due to the IPv6 technology being reasonably new, it can cause the “Windows has detected an IP address conflict” error to show up on your device. The last thing we recommend trying is to disable IPv6 entirely.

1. Press and hold the Windows key on your keyboard, then press R. This will bring up the Run utility.
2. Type in ncpa.cpl and click on the OK button. Doing this will open up the Network Connections window.
3. Network Connections window

IP Address is an interesting location that each web associated gadget has. At the point when we associate our cell phones, tablet, workstations, or some other gadget to the nearby organization, it gets an interesting IP Address. The primary motivation behind an IP Address is to recognize each gadget associated with the organization. 

Assume in the event that you have five PCs associated with a solitary organization, the IP Address for every one of the associated PCs will be extraordinary. Every one of the gadgets associated with the organization will have its own IP Address, and it will be exceptional. Be that as it may, now and then clients face regular IP Address issues like ‘Windows has identified an IP Address strife’. 

The blunder message ‘Windows Has Detected An IP Address Conflict’ by and large happens when two gadgets have a similar IP Address on the organization. The blunder message keeps clients from getting to the web. 

Fix ‘Windows has recognized an IP Address strife’ Error 

Along these lines, in the event that you are likewise getting the organization mistake ‘Windows has identified an IP Address struggle’, at that point you need to do some workaround given underneath. In this article, we will share probably the best techniques to determine the ‘Windows has identified an IP Address strife’ 

At the point when you interface your PC, cell phone, or some other gadgets to a neighborhood network(*), every one of the gadgets will get an extraordinary IP address. The main role of this is to give a basic tending to procedure to the organization and its component. It is regularly used to recognize every gadget on a similar organization just as to convey to one another. You can likewise call it as the inner IP (Internet Protocol). 

* In this article, I will just discuss the nearby organization just (LAN), so a few ideas might be clarified in a tight degree. 

For example, when you interface one work area, one PC, and one cell phone into a similar remote organization, at that point every gadget will have its own IP address, and it’s extraordinary. 

Be that as it may, in some cases a couple of things don’t go the manner in which they were planned in view of breakdowns or wrong designs. Subsequently, you will get IP address clashes, where Windows has distinguished an IP address struggle message in the event that you are utilizing a Windows PC.